HARDWARE - Electromichanical
 10 Line Series
solenoid operated locks are designed for simple, stand alone applications or to be readily integrated into sophisticated, building wide, access control systems. They provide the mechanical locking security to complement the electronic control system. Meeting ANSI Grade 1 requirements, they are UL Listed for use on fire doors and use the same rugged construction and attractive trim of their mechanical counterparts. The internal solenoid requires a 24 VDC (filtered and regulated) power source and draws 0.25 Amperes of current. If a 24 VDC power source is unavailable, the lock is provided with a 'full wave bridge rectifier' to convert a 24 VAC (not to exceed 26.2 VAC as the solenoid can be damaged) source to 24 VDC.
8 Line Series
solenoid operated locks are designed for simple, stand alone applications or to be readily integrated into sophisticated, building wide, access control systems. They provide the mechanical locking security to complement the electronic control system. Meeting ANSI Grade 1 requirements, they are UL Listed for use on fire doors and use the same rugged construction and attractive trim as their mechanical counterparts. The internal solenoid requires a 24 VDC (filtered and regulated) power source and draws 0.25 Amperes of current. If a 24 VDC power source is unavailable, the lock is provided with a 'full wave bridge rectifier' to convert a 24 VAC (not to exceed 26.2 VAC as the solenoid can be damaged) source to 24 VDC.
8200 Mortise
The 'solenoid operated' mortise lock is appropriate for intermittent and continuous duty applications. These 'electrified' mortise locks are designed to meet industry standards in areas of operating temperature, 'mechanical' shock and fire safety. The solenoid requires a 24 VDC (filtered and regulated) power source and draws 0.25 Amperes of current. If a 24 VDC power source is unavailable, the lock is provided with a 'full wave bridge rectifier' to convert a 24 VAC (not to exceed 26.2 VAC as the solenoid can be damaged) source to 24 VDC. All mortise locks are available with a knob or lever handle trim. These locks can be ordered with an internal switch (RX prefix) which can provide for independent monitoring of the inside or outside knob/lever .